A sample permit for an organization performing construction work. SRO permit for especially dangerous work

Types of work in construction - this is a list of construction work, for the legal implementation of which the company is obliged to join the SRO. The list is approved by the Order of the Ministry of Regional Development Russian Federation, but was repeatedly changed, adopted in new edition. The list was approved by order of the Ministry of Regional Development of the Russian Federation dated December 30, 2009 No. 624, and the changes were made by order of the Ministry of Regional Development of the Russian Federation dated June 23, 2010 No. 294.

The classifier of types of work in construction, design, engineering surveys will help you determine the types of activities for which you need to obtain an SRO permit. If you did not find certain types of work in the classifier, and you have any doubts about the need to obtain a permit, be sure to contact free consultation to our experts! The lack of admission of the SRO for certain types of work may be fraught with penalties for the enterprise. A timely and complete consultation of an expert in the field of SRO will protect you from these and other undesirable moments.

  • 1. Geodetic work performed on construction sites
    • 1.1. Marking work in the construction process
    • 1.2. Geodetic control of the accuracy of the geometric parameters of buildings and structures *
  • 2. Preparatory work
    • 2.1. Dismantling (dismantling) of buildings and structures, walls, ceilings, flights of stairs and other structural and related elements or parts thereof *
    • 2.2. Construction of temporary: roads; sites; engineering networks and structures *
    • 2.3. Installation of rail crane tracks and foundations (supports) of stationary cranes
    • 2.4. Installation and dismantling of inventory external and internal scaffolding, technological garbage chutes*
  • 3. Earthworks
    • 3.1. Mechanized excavation *
    • 3.2. Soil excavation and drainage arrangement in water management construction
    • 3.3. Soil development by hydromechanization
    • 3.4. Works on artificial freezing of soils
    • 3.5. Soil compaction with rollers, compactors or heavy rammers*
    • 3.6. Mechanized loosening and development of permafrost soils
    • 3.7. Works on dewatering, organization of surface runoff and drainage
  • 4. Construction of wells
    • 4.1. Drilling, construction and installation of oil and gas wells
    • 4.2. Drilling and construction of wells (except for oil and gas wells)
    • 4.3. Fixing wells with pipes, extracting pipes, free lowering or lifting pipes from wells
    • 4.4. Plugging works
    • 4.5. Construction of mine wells
  • 5. Pile work. Soil stabilization
    • 5.1. Pile work performed from the ground, including in sea and river conditions
    • 5.2. Pile work performed in frozen and permafrost soils
    • 5.3. Grillage device
    • 5.4. Installation of driven and bored piles
    • 5.5. Thermal strengthening of soils
    • 5.6. Cementation of soil bases with driving injectors
    • 5.7. Silicization and resinization of soils
    • 5.8. Works on the construction of structures using the "wall in the ground" method
    • 5.9. Driving and lifting steel and sheet piles
  • 6. Installation of concrete and reinforced concrete monolithic structures
  • 7. Installation of prefabricated concrete and reinforced concrete structures
    • 7.1. Installation of foundations and structures of the underground part of buildings and structures
    • 7.2. Installation of structural elements of the above-ground part of buildings and structures, including columns, frames, crossbars, trusses, beams, slabs, belts, wall panels and partitions
    • 7.3. Installation of volumetric units, including ventilation units, elevator shafts and garbage chutes, sanitary cabins
  • 8. Drilling and blasting during construction
  • 9. Works on the device of stone structures
    • 9.1. Arrangement of structures of buildings and structures made of natural and artificial stones, including those with cladding *
    • 9.2. Installation of brick structures, including those with cladding *
    • 9.3. Arrangement of heating furnaces and hearths *
  • 10. Mounting metal structures
    • 10.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures
    • 10.2. Installation, reinforcement and dismantling of structures of transport galleries
    • 10.3. Installation, reinforcement and dismantling of tank structures
    • 10.4. Installation, strengthening and dismantling of mast structures, towers, exhaust pipes
    • 10.5. Installation, reinforcement and dismantling of technological structures
    • 10.6. Installation and dismantling of cable supporting structures (stretch marks, cable-stayed structures, etc.)
  • 11. Installation of wooden structures
    • 11.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures, including those made of glued structures *
    • 11.2. Assembly of residential and public buildings from prefabricated parts of a complete delivery *
  • 12. Protection of building structures, pipelines and equipment (except for main and field pipelines)
    • 12.1. Lining works
    • 12.2. Masonry made of acid-resistant bricks and shaped acid-resistant ceramic products
    • 12.3. Protective coating with paintwork materials *
    • 12.4. Gumming (lining with sheet rubber and liquid rubber compounds)
    • 12.5. Glue insulation device
    • 12.6. The device of metallization coatings
    • 12.7. Application of a front coating when installing a monolithic floor in rooms with aggressive environments
    • 12.8. Antiseptic treatment of wooden structures
    • 12.9. Waterproofing of building structures
    • 12.10. Works on thermal insulation of buildings, building structures and equipment
    • 12.11. Works on thermal insulation of pipelines *
    • 12.12. Works on fire protection of building structures and equipment
  • 13. Roofing
    • 13.1. Installation of roofs from piece and sheet materials *
    • 13.2. Roofing from rolled materials *
    • 13.3. Liquid roofing device *
  • 14. Facade works
    • 14.1. Surface cladding with natural and artificial stones and linear shaped stones *
    • 14.2. Installation of ventilated facades *
  • 15. Arrangement of internal engineering systems and equipment of buildings and structures
    • 15.1. Installation and dismantling of the water supply and sewerage system *
    • 15.2. Installation and dismantling of the heating system *
    • 15.3. Installation and dismantling of the gas supply system
    • 15.4. Installation and dismantling of the ventilation and air conditioning system *
    • 15.5. The device of the power supply system *
    • 15.6. Arrangement of electrical and other control networks for life support systems of buildings and structures *
  • 16. Installation of external water supply networks
    • 16.1. Laying of water pipelines
    • 16.2. Installation and dismantling of shut-off valves and equipment for water supply networks
    • 16.3. Installation of water wells, caps, catchment dampers
    • 16.4. Cavity cleaning and testing of water pipelines
  • 17. Construction of external sewer networks
    • 17.1. Laying of non-pressure sewer pipelines
    • 17.2. Laying sewer pressure pipelines
    • 17.3. Installation and dismantling of shut-off valves and equipment of sewer networks
    • 17.4. Installation of sewer and drain wells
    • 17.5. Arrangement of a filtering base for silt pads and filtration fields
    • 17.6. Laying drainage pipes on sludge beds
    • 17.7. Cavity cleaning and testing of sewer pipelines
  • 18. Construction of external heat supply networks
    • 18.1. Laying of heat supply pipelines with a coolant temperature of up to 115 degrees Celsius
    • 18.2. Laying of heat supply pipelines with a coolant temperature of 115 degrees Celsius and above
    • 18.3. Installation and dismantling of shutoff valves and equipment of heat supply networks
    • 18.4. Arrangement of wells and chambers of heat supply networks
    • 18.5. Cavity cleaning and testing of heating pipelines
  • 19. The device of external gas supply networks, except for the main
    • 19.1. Laying of gas pipelines with working pressure up to 0.005 MPa inclusive
    • 19.2. Laying of gas pipelines with working pressure from 0.005 MPa to 0.3 MPa inclusive
    • 19.3. Laying of gas pipelines with working pressure from 0.3 MPa to 1.2 MPa inclusive (for natural gas), up to 1.6 MPa inclusive (for liquefied petroleum gas)
    • 19.4. Installation of condensate collectors for hydraulic seals and compensators on gas pipelines
    • 19.5. Installation and dismantling of gas control points and installations
    • 19.6. Installation and dismantling of tank and group cylinder installations of liquefied gas
    • 19.7. Entering the gas pipeline into buildings and structures
    • 19.8. Installation and dismantling of gas equipment for consumers using natural and liquefied gas
    • 19.9. Tapping under pressure into existing gas pipelines, disconnection and plugging under pressure of existing gas pipelines
    • 19.10. Cavity cleaning and testing of gas pipelines
  • 20. The device of external electrical networks and communication lines
    • 20.1. Arrangement of power supply networks with voltage up to 1 kV inclusive *
    • 20.2. Arrangement of power supply networks with voltage up to 35 kV inclusive
    • 20.3. Arrangement of power supply networks with voltage up to 330 kV inclusive
    • 20.4. Construction of power supply networks with voltage over 330 kV
    • 20.5. Installation and dismantling of supports for overhead power lines with voltage up to 35 kV
    • 20.6. Installation and dismantling of supports for overhead power lines with voltage up to 500 kV
    • 20.7. Installation and dismantling of supports for overhead power lines with a voltage of more than 500 kV
    • 20.8. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltage up to 35 kV inclusive
    • 20.9. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltage over 35 kV
    • 20.10. Installation and dismantling of transformer substations and linear electrical equipment with voltage up to 35 kV inclusive
    • 20.11. Installation and dismantling of transformer substations and linear electrical equipment with voltage over 35 kV
    • 20.12. Installation of distribution devices, switching equipment, protection devices
    • 20.13. Arrangement of external communication lines, including telephone, radio and television *
  • 21. Arrangement of nuclear facilities
    • 21.1. Works on the construction of facilities with nuclear installations
    • 21.2. Works on the construction of nuclear weapons complex facilities
    • 21.3. Works on the construction of elementary particle accelerators and hot chambers
    • 21.4. Works on the construction of storage facilities for nuclear materials and radioactive substances, storage facilities for radioactive waste
    • 21.5. Works on the construction of nuclear fuel cycle facilities
    • 21.6. Works on the construction of facilities for the extraction and processing of uranium
    • 21.7. Works on decommissioning of nuclear facilities
  • 22. Arrangement of oil and gas facilities gas industry
    • 22.1. Installation of main and field pipelines
    • 22.2. Works on the arrangement of facilities for preparing oil and gas for transport
    • 22.3. Arrangement of oil depots and gas storage facilities
    • 22.4. Installation of crossing structures under linear objects (roads and railways) and other obstacles of natural and artificial origin
    • 22.5. Works on the construction of crossings by the method of directional drilling
    • 22.6. Device for electrochemical protection of pipelines
    • 22.7. Tapping under pressure into existing main and field pipelines, disconnection and plugging under pressure of existing main and field pipelines
    • 22.8. Performance of anti-corrosion protection and insulation works in relation to main and field pipelines
    • 22.9. Works on the development of oil and gas fields offshore
    • 22.10. Works on the construction of gas filling compressor stations
    • 22.11. Quality control of welded joints and their isolation
    • 22.12. Cavity cleaning and testing of main and field pipelines
  • 23. Installation work
    • 23.1. Installation of handling equipment
    • 23.2. Elevator installation
    • 23.3. Installation of equipment for thermal power plants
    • 23.4. Installation of boiler room equipment
    • 23.5. Installation of compressor units, pumps and fans *
    • 23.6. Installation of electrical installations, equipment, automation and alarm systems *
    • 23.7. Installation of equipment for nuclear facilities
    • 23.8. Installation of equipment for cleaning and preparation for the transportation of gas and oil
    • 23.9. Installation of equipment for oil and gas pumping stations and for other product pipelines
    • 23.10. Installation of natural gas liquefaction equipment
    • 23.11. Installation of gas station equipment
    • 23.12. Installation of equipment for ferrous metallurgy enterprises
    • 23.13. Installation of equipment for non-ferrous metallurgy enterprises
    • 23.14. Installation of equipment for the chemical and oil refining industries
    • 23.15. Installation of mining and ore-dressing equipment
    • 23.16. Installation of equipment for infrastructure facilities railway transport
    • 23.17. Installation of subway and tunnel equipment
    • 23.18. Installation of equipment for hydroelectric stations and other hydraulic structures
    • 23.19. Installation of equipment for electrical industry enterprises
    • 23.20. Installation of equipment for industrial enterprises building materials
    • 23.21. Installation of equipment for the pulp and paper industry
    • 23.22. Installation of equipment for textile industry enterprises
    • 23.23. Installation of equipment for printing industry enterprises
    • 23.24. Installation of equipment for food industry enterprises *
    • 23.25. Installation of equipment for theater and entertainment enterprises
    • 23.26. Installation of equipment for granaries and grain processing enterprises
    • 23.27. Installation of equipment for cinematography enterprises *
    • 23.28. Installation of equipment for electronics and communications industries *
    • 23.29. Installation of equipment for healthcare institutions and medical industry enterprises *
    • 23.30. Installation of equipment for agricultural production, including fish processing and fish storage *
    • 23.31. Installation of equipment for consumer services and public utilities *
    • 23.32. Installation of water intake equipment, sewerage and treatment facilities
    • 23.33. Installation of equipment for communication facilities *
    • 23.34. Installation of equipment for space infrastructure facilities
    • 23.35. Installation of airport equipment and other aviation infrastructure facilities
    • 23.36. Installation of equipment for sea and river ports
  • 24. Commissioning
    • 24.1. Commissioning of lifting and transport equipment
    • 24.2. Commissioning of elevators
    • 24.3. Commissioning of synchronous generators and excitation systems
    • 24.4. Commissioning of power and instrument transformers
    • 24.5. Commissioning of switching devices
    • 24.6. Commissioning of relay protection devices
    • 24.7. Commissioning of automation in power supply *
    • 24.8. Commissioning of voltage and control current systems
    • 24.9. Commissioning of electrical machines and electric drives
    • 24.10. Commissioning of automation systems, alarm systems and related devices *
    • 24.11. Commissioning of stand-alone system debugging *
    • 24.12. Commissioning works of complex adjustment of systems *
    • 24.13. Commissioning of telemechanics *
    • 24.14. Adjustment of ventilation and air conditioning systems *
    • 24.15. Commissioning of automatic machine lines
    • 24.16. Commissioning of multi-purpose metal-cutting machines with CNC
    • 24.17. Commissioning of unique metal-cutting machines weighing over 100 tons
    • 24.18. Commissioning of refrigeration units *
    • 24.19. Commissioning of compressor units
    • 24.20. Commissioning of steam boilers
    • 24.21. Commissioning of hot water boilers *
    • 24.22. Commissioning of auxiliary boiler equipment *
    • 24.23. Commissioning of water treatment equipment and chemical water treatment equipment
    • 24.24. Start-up and adjustment works of technological installations of the fuel economy
    • 24.25. Commissioning of the gas-air path
    • 24.26. Commissioning of general boiler systems and utilities
    • 24.27. Commissioning of equipment for processing and finishing wood
    • 24.28. Commissioning of drying plants
    • 24.29. Commissioning works of water supply facilities
    • 24.30. Commissioning works of sewerage facilities
    • 24.31. Commissioning works at the facilities of the oil and gas complex
    • 24.32. Commissioning works at nuclear facilities
  • 25. Construction of roads and airfields
    • 25.1. Works on the construction of subgrade for highways, airport platforms, runways, taxiways
    • 25.2. The device of the bases of highways
    • 25.3. Arrangement of foundations for airport aprons, runways, taxiways
    • 25.4. Road pavement devices, including those reinforced with binders
    • 25.5. Devices for covering airport aprons, runways, taxiways
    • 25.6. Installation of drainage, catchment, culvert, spillway devices
    • 25.7. Installation of protective fences and elements of arrangement of highways
    • 25.8. Road marking device
  • 26. Arrangement of railway and tram tracks
    • 26.1. Works on the construction of subgrade for railway tracks
    • 26.2. Works on the construction of subgrade for tram tracks
    • 26.3. The device of the upper structure of the railway track
    • 26.4. Arrangement of drainage and protective structures of the subgrade of the railway track
    • 26.5. Installation of signaling, centralization and blocking of railways
    • 26.6. Railway electrification
    • 26.7. Stabilization of soils in the right of way of the railway
    • 26.8. Construction of railway crossings
  • 27. Construction of tunnels, subways
    • 27.1. Sinking of tunnels and subways without the use of special methods of tunneling
    • 27.2. Excavation of tunnels and subways using artificial freezing
    • 27.3. Sinking of tunnels and subways using grouting
    • 27.4. Sinking of tunnels and subways with the use of electrochemical fastening
    • 27.5. Sinking of tunnels and subways with the use of lowering support
    • 27.6. Arrangement of internal structures of tunnels and subways
    • 27.7. Subway track arrangement
  • 28. Installation of mine structures
    • 28.1. Sinking of the development of mine structures without the use of special methods of sinking
    • 28.2. Sinking of the development of mine structures using artificial freezing
    • 28.3. Sinking of the development of mine structures with the use of grouting
    • 28.4. Sinking of the development of mine structures with the use of electrochemical fastening
    • 28.5. Sinking of the development of mine structures with the use of lowering lining
  • 29. Arrangement of bridges, overpasses and overpasses
    • 29.1. Installation of monolithic reinforced concrete and concrete structures of bridges, flyovers and overpasses
    • 29.2. Arrangement of prefabricated reinforced concrete structures of bridges, flyovers and overpasses
    • 29.3. Construction of pedestrian bridges
    • 29.4. Installation of steel superstructures of bridges, flyovers and overpasses
    • 29.5. Installation of wooden bridges, flyovers and overpasses
    • 29.6. Installation of stone bridges, flyovers and overpasses
    • 29.7. Laying culvert pipes on finished foundations (bases) and drainage trays
  • 30. Hydraulic works, diving works
    • 30.1. Development and movement of soil by jet and floating dredgers
    • 30.2. Loosening and development of soils under water mechanized way and issuance to the dump or floating facilities
    • 30.3. Drilling and construction of wells under water
    • 30.4. Piling work carried out in marine conditions from floating facilities, including the installation of shell piles
    • 30.5. Pile work performed in river conditions from floating facilities, including the installation of shell piles
    • 30.6. Construction of structures in sea and river conditions from natural and artificial massifs
    • 30.7. Construction of dams
    • 30.8. Installation, dismantling of building structures in underwater conditions
    • 30.9. Laying pipelines in underwater conditions
    • 30.10. Laying cables in underwater conditions, including electrical and communication
    • 30.11. Diving (underwater construction) works, including quality control of hydrotechnical works under water
  • 31. Industrial furnaces and chimneys
    • 31.1. Blast furnace masonry
    • 31.2. Masonry of the upper structure of glass melting furnaces
    • 31.3. Installation of furnaces from prefabricated elements of increased factory readiness
    • 31.4. Electrolyzers for the aluminum industry
    • 31.5. Lining of industrial flue and ventilation furnaces and pipes
  • 32. Works on the implementation of construction control by the involved developer or customer on the basis of a contract legal entity or individual entrepreneur
    • 32.1. Construction control over general construction works (groups of types of work N 1 - 3, 5 - 7, 9 - 14)
    • 32.2. Construction control over well construction works (group of types of work N 4)
    • 32.3. Construction control over drilling and blasting (group of types of work N 8)
    • 32.4. Construction control over work in the field of water supply and sewerage (type of work N 15.1, 23.32, 24.29, 24.30, groups of types of work N 16, 17)
    • 32.5. Construction control over work in the field of heat and gas supply and ventilation (types of work N 15.2, 15.3, 15.4, 23.4, 23.5, 24.14, 24.19, 24.20, 24.21, 24.22, 24.24, 24.25, 24.26, groups of types of work N 18, 19)
    • 32.6. Construction control over work in the area fire safety(type of works N 12.3, 12.12, 23.6, 24.10 - 24.12)
    • 32.7. Construction control over work in the field of power supply (type of work N 15.5, 15.6, 23.6, 24.3 - 24.10, group of types of work N 20)
    • 32.8. Construction control during the construction, reconstruction and overhaul of communication facilities (types of work N 20.13, 23.6, 23.28, 23.33, 24.7, 24.10, 24.11, 24.12)
    • 32.9. Construction control during the construction, reconstruction and overhaul of oil and gas industry facilities (type of work N 23.9, 23.10, group of types of work N 22)
    • 32.10. Construction control during the construction, reconstruction and overhaul of roads and airfields, bridges, overpasses and overpasses (type of work N 23.35, groups of types of work N 25, 29)
    • 32.11. Construction control during the construction of railway and tram tracks (types of work N 23.16, group of types of work N 26)
    • 32.12. Construction control during construction, reconstruction and overhaul in underground conditions (types of work N 23.17, groups of types of work N 27, 28)
    • 32.13. Construction control over hydraulic engineering and diving works (group of types of work N 30)
    • 32.14. Construction control during the construction, reconstruction and overhaul of industrial furnaces and chimneys (group of types of work N 31)
  • 33. Works on the organization of construction, reconstruction and overhaul engaged by the developer or customer on the basis of an agreement by a legal entity or an individual entrepreneur (general contractor):
    • 33.1. Industrial engineering
    • 33.1.1. Enterprises and facilities of the fuel industry
    • 33.1.2. Enterprises and facilities of the coal industry
    • 33.1.3. Enterprises and objects of ferrous metallurgy
    • 33.1.4. Enterprises and objects of non-ferrous metallurgy
    • 33.1.5. Enterprises and objects of the chemical and petrochemical industry
    • 33.1.6. Enterprises and objects of mechanical engineering and metalworking
    • 33.1.7. Enterprises and facilities of the forestry, woodworking, pulp and paper industries
    • 33.1.8. Enterprises and objects of light industry *
    • 33.1.9. Enterprises and facilities of the food industry *
    • 33.1.10. Enterprises and objects of agriculture and forestry *
    • 33.1.11. Thermal power plants
    • 33.1.12. Nuclear facilities
    • 33.1.13. Power supply facilities over 110 kV
    • 33.1.14. Oil and gas facilities
    • 33.2. Transport construction
    • 33.2.1. Roads and road transport infrastructure
    • 33.2.2. Railways and railway infrastructure facilities
    • 33.2.3. Airports and other aviation infrastructure facilities
    • 33.2.4. Road and rail tunnels
    • 33.2.5. Subways
    • 33.2.6. Bridges (large and medium)
    • 33.2.7. Enterprises and public transport facilities *
    • 33.3. Housing and civil construction
    • 33.4. Power supply facilities up to 110 kV inclusive
    • 33.5. Heat supply facilities
    • 33.6. Gas supply facilities
    • 33.7. Water supply and sewerage facilities
    • 33.8. Buildings and facilities of communication facilities
    • 33.9. Maritime transport facilities
    • 33.10. River transport facilities
    • 33.11. Hydropower facilities
    • 33.12. Dams, dams, canals, bank protection structures, reservoirs (with the exception of hydropower facilities)
    • 33.13. Irrigation facilities
  • 34. Works for the implementation of construction control by the developer, or by a legal entity or individual entrepreneur engaged by the developer or customer on the basis of an agreement during the construction, reconstruction and overhaul of nuclear facilities (types of work N 23.7, 24.32, group of types of work N 21)

    • SRO permit for especially dangerous work

    Additional requirements to obtain a permit for a special dangerous work

    • having an ISO certificate
    • increased insurance coverage

Types of design work - this is an official list of design work, for the implementation of which it is necessary to obtain a SRO permit without fail. The list was approved by the Order of the Ministry of Regional Development of December 30, 2009 No. 624, as amended by Order No. 294 of June 23, 2010.

  • 1. Work on the preparation of a scheme for the planning organization of a land plot:
    • 1.1. Preparation work master plan land plot
    • 1.2. Works on the preparation of a planning organization scheme for the route of a linear facility
    • 1.3. Works on the preparation of the scheme of planning organization of the right of way of the linear structure
  • 2. Work on the preparation of architectural solutions
  • 3. Work on the preparation of constructive solutions
  • 4. Work on the preparation of information on internal engineering equipment, internal networks of engineering and technical support, on the list of engineering and technical measures:
    • 4.1. Works on the preparation of projects for internal engineering systems of heating, ventilation, air conditioning, smoke ventilation, heat supply and refrigeration
    • 4.2. Works on the preparation of projects for internal engineering systems of water supply and sewerage
    • 4.3. Works on the preparation of projects for internal power supply systems *
    • 4.4. Works on the preparation of projects for internal low-voltage systems*
    • 4.5. Works on the preparation of projects for internal dispatching, automation and management of engineering systems
    • 4.6. Works on the preparation of projects for internal gas supply systems
  • 5. Work on the preparation of information on external networks of engineering and technical support, on the list of engineering and technical measures:
    • 5.1. Works on the preparation of projects for external heat supply networks and their structures
    • 5.2. Works on the preparation of projects for external water supply and sewerage networks and their structures
    • 5.3. Works on the preparation of projects for external power supply networks up to 35 kV inclusive and their structures
    • 5.4. Works on the preparation of projects for external power supply networks of not more than 110 kV inclusive and their structures
    • 5.5. Works on the preparation of projects for external power supply networks of 110 kV and more and their structures
    • 5.6. Works on the preparation of projects for external networks of low-voltage systems
    • 5.7. Works on the preparation of projects for external gas supply networks and their structures
  • 6. Work on the preparation of technological solutions:
    • 6.1. Works on the preparation of technological solutions for residential buildings and their complexes
    • 6.2. Works on the preparation of technological solutions for public buildings and structures and their complexes
    • 6.3. Works on the preparation of technological solutions for industrial buildings and structures and their complexes
    • 6.4. Works on the preparation of technological solutions for transport facilities and their complexes
    • 6.5. Works on the preparation of technological solutions for hydraulic structures and their complexes
    • 6.6. Works on the preparation of technological solutions for agricultural facilities and their complexes
    • 6.7. Works on the preparation of technological solutions for special-purpose facilities and their complexes
    • 6.8. Works on the preparation of technological solutions for oil and gas facilities and their complexes
    • 6.9. Works on the preparation of technological solutions for objects of collection, processing, storage, processing and disposal of waste and their complexes
    • 6.10. Works on preparation of technological solutions for facilities nuclear energy and industry and their complexes
    • 6.11. Work on the preparation of technological solutions for military infrastructure facilities and their complexes
    • 6.12. Works on the preparation of technological solutions for treatment facilities and their complexes
    • 6.13. Works on the preparation of technological solutions for metro facilities and their complexes
  • 7. Work on the development of special sections project documentation:
    • 7.1. Engineering and technical measures for civil defense
    • 7.2. Engineering and technical measures to prevent natural and man-made emergencies
    • 7.3. Development of a declaration on industrial safety hazardous production facilities
    • 7.4. Development of a declaration of safety of hydraulic structures
    • 7.5. Development of justification for radiation and nuclear protection
  • 8. Works on the preparation of projects for the organization of construction, demolition and dismantling of buildings and structures, extension of the service life and conservation *
  • 10. Works on the preparation of draft measures to ensure fire safety
  • 11. Work on the preparation of draft measures to ensure access for people with limited mobility
  • 12. Work on the inspection of building structures of buildings and structures
  • 13. Works on organizing the preparation of project documentation, attracted by the developer or customer on the basis of an agreement by a legal entity or an individual entrepreneur (general designer)
    • * These types and groups of types of work require obtaining a certificate of admission to types of work that affect the safety of the facility capital construction, in case such work is performed at the facilities specified in Article 48.1 of the Town Planning Code of the Russian Federation - the List of especially dangerous, technically complex and unique facilities.

Types of work in engineering surveys - a list of engineering and survey works, for which it is necessary to common grounds obtain an SRO permit. This list types of activities officially approved by the Order of the Ministry of Regional Development dated December 30, 2009 No. 624, as amended by Order No. 294 dated June 23, 2010.


  • 1. Works as part of engineering and geodetic surveys
    • 1.1. Creation of reference geodetic networks
    • 1.2. Geodetic observations of deformations and settlements of buildings and structures, movements of the earth's surface and hazardous natural processes
    • 1.3. Creation and updating of engineering and topographic plans on a scale of 1:200 - 1:5000, including in digital form, survey of underground utilities and structures
    • 1.4. Tracing line features
    • 1.5. Engineering and hydrographic works
    • 1.6. Special geodetic and topographic works during the construction and reconstruction of buildings and structures
  • 2. Works as part of engineering and geological surveys
    • 2.1. Engineering and geological survey on a scale of 1:500 - 1:25000
    • 2.2. Sinking of mine workings by testing, laboratory studies of the physical and mechanical properties of the soil and chemical properties groundwater samples
    • 2.3. The study of hazardous geological and engineering-geological processes with the development of recommendations for the engineering protection of the territory
    • 2.4. Hydrogeological research
    • 2.5. Engineering and geophysical research
    • 2.6. Engineering geocryological research
    • 2.7. Seismological and seismotectonic studies of the territory, seismic microzoning
  • 3. Works as part of engineering and hydrometeorological surveys
    • 3.1. Meteorological observations and study of the hydrological regime of water bodies
    • 3.2. Study of hazardous hydrometeorological processes and phenomena with calculations of their characteristics
    • 3.3. Study of channel processes of water objects, deformations and processing of banks
    • 3.4. Studies of the ice regime of water bodies
  • 4. Works as part of engineering and environmental surveys
    • 4.1. Engineering and environmental survey of the territory
    • 4.2. Studies of chemical pollution of soils, surface and ground waters, atmospheric air, sources of pollution
    • 4.3. Laboratory chemical-analytical and gas-chemical studies of samples and samples of soil and water
    • 4.4. Research and assessment of physical impacts and radiation situation on the territory
    • 4.5. Study of vegetation, wildlife, sanitary-epidemiological and medical-biological studies of the territory*
  • 5. Works as part of engineering and geotechnical surveys
    • 5.1. Sinking of mine workings with testing and laboratory studies of the mechanical properties of soils with the determination of characteristics for specific schemes for calculating the bases of foundations
    • 5.2. Field tests of soils with the determination of their standard strength and deformation characteristics (stamp, shear, pressuremeter, shear). Tests of reference in-situ piles
    • 5.3. Determination of standard mechanical characteristics of soils by methods of static, dynamic and drilling sounding
    • 5.4. Physical and mathematical modeling of the interaction of buildings and structures with the geological environment
    • 5.5. Special studies of soil characteristics according to individual programs for non-standard, including linear methods for calculating the bases of foundations and structures of buildings and structures
    • 5.6. Geotechnical control of construction of buildings, structures and adjacent territories
  • 6. Inspection of the state of soils of the foundation of buildings and structures
  • 7. Works on the organization of engineering surveys by a developer engaged on the basis of a contract or an authorized legal entity or an individual entrepreneur (general contractor)

New amendments to the City Planning Code came into force.

The changes affected, among other things, the form of existence of the admission of the SRO.

Federal Law No. 372-FZ of July 3, 2016 (as amended on December 28, 2016) “On Amendments to the Town Planning Code of the Russian Federation and Certain Legislative Acts of the Russian Federation” informs: from July 1, 2017, the validity of certificates of admission of self-regulatory organizations (SROs) to work Design, Engineering Survey and Construction has been discontinued.

Leave a request for a consultation and fix the following gifts:

ISO 9001 - Quality Management Systems!

OHSAS 18001 - Occupational Health and Safety Management Systems!

40% discount for the inclusion of your employees in the NOSTROY/NOPRIZ register!

Advanced training in security environment on the CEO!

Order in the amount of 35,000 rubles and get 10% back on bank card!

Document type

At the moment, the SRO certificate is an extract from the register of members of self-regulatory organizations, it is provided in in electronic format. The document issues a partnership in which an individual entrepreneur or legal entity is a member.

The applicant needs to apply for the issuance of this permit in free form on paper with your signature. The document, if necessary, is printed on plain paper, the seal of the SRO and the signature of the head are affixed to it. The excerpt is valid for 1 month from the date of issue.

Mandatory data indicated in the SRO statement

The document to be issued must be filled in the following columns in strict order:

  • Date of issue of the certificate

    • Document Number

    Name of the SRO that issues the statement

    Full details of the contractor (to whom the certificate is issued) and a list of his specialized construction works, to which you have access

    Grounds for issuing a certificate

    Seal and signature of the head of the SRO

The extract should not contain blots and corrections in the printed version.

Checking the SRO statement

You can always verify the authenticity of the SRO statement issued to you. To do this, visit the website of the State Register of Self-Regulatory Organizations.

    Use the search box, fill in the name of the self-regulatory organization, enter the taxpayer identification number, registration number records (SRO number, for example “SRO-S-293-13032018”).

    Click search. A company that is listed in a self-regulatory organization will be found, otherwise your company does not have permission.

What else you should pay attention to when applying for an extract from the SRO

Having on hand SRO admission, pay attention to the following points:

  • field "date": the validity of the statement is not less than a month from the date of issue;

    • column 3: there should be no information that the organization is excluded from the SRO;

    column 4: must contain information on what types of construction work the participant has the right to perform;

    points 5, 6: whether the level of responsibility indicated in the certificate corresponds to the price offered by the contract participant (for participation in state and municipal tenders in accordance with 223-FZ and 44-FZ).

In 2018, the company does not receive a special certificate form on paper with protective layers and a hologram for admission to design, survey, and construction work. Now the organization receives the usual one in which it is a member. The document is issued in electronic or paper form.

SRO is a non-profit self-regulatory organization that unites business or professional activity in one industry or market. In some ways, the SRO is reminiscent of the concept of a guild (from the German Gilde - an association of merchants), which also unites people of the same or similar professions. Another name for a self-regulatory organization is a non-profit partnership.

In Russia, participants in the securities market were first obliged to join self-regulatory organizations back in the mid-1990s. The activities of SROs are regulated by federal law No. 315-F3 dated December 1, 2007 “On Self-Regulatory Organizations”. Membership in such organizations is voluntary, but federal laws there may be cases of mandatory participation in SROs, for example, in construction. Just using the example of SRO for builders, we will try to understand how this structure functions.

When should I join the SRO?

From January 1, 2010, licenses for design, construction and engineering surveys for buildings and structures were terminated, and instead of them, participation in the relevant self-regulatory organization became mandatory if the organization or individual entrepreneur plans to carry out the work specified in List of types of work(approved by the Order of the Ministry of Regional Development of the Russian Federation dated December 30, 2009 No. 624).

If the work you are planning is not listed in the List, then it is not necessary to join the SRO. If there is, but at the same time marked with an asterisk *, then SRO approval is required only if the facility on which these works will be carried out is indicated in Article 48.1 of the Town Planning Code of the Russian Federation.

The list does not apply to the following objects:

  • not requiring the issuance of a building permit in accordance with part 17 of article 51 of the Town Planning Code of the Russian Federation (garages not intended for entrepreneurial activity, kiosks, sheds, buildings and structures for auxiliary use, etc.);
  • for objects of individual housing construction, with no more than three floors.

That is, there is a large amount of construction work for which SRO admission, and hence entry into self-regulatory organization not required. For example, a permit is not needed for finishing and painting work, installing windows, landscaping work, and individual low-rise construction.

At the same time, the customer may require the contractor to be a member of an SRO, and the condition for the admission of a self-regulatory organization may be mandatory for the performance of work under a state order.

What does the SRO do?

The SRO develops standards and rules for the activities of participants in their professional field and monitors their observance. For violation of these rules, members of the self-regulatory organization may be subject to disciplinary measures, such as:

  • instructions obliging a member of a self-regulatory organization to eliminate the identified violations in their activities;
  • issuing a warning;
  • imposition of a fine;
  • exclusion from SRO members.

If necessary, members of self-regulatory organizations bear solidarity liability to third parties for damages at the expense compensation funds and civil liability insurance. Considering that all members of the self-regulatory organization are financially responsible for the dishonesty of one SRO member, it becomes clear that this mechanism works to improve the quality of construction services.

Types of SROs in the construction industry

AT construction industry There are three types of self-regulatory organizations:

  • SRO in construction, for organizations and individual entrepreneurs directly involved in construction;
  • SRO in engineering surveys;
  • SRO in design, for those who develop project documentation.

If an organization or an individual entrepreneur intends to engage in construction, design and survey work, then three separate permits must be obtained for each of these activities.

Self-regulatory organizations are united by type of activity into national structures:

  • National Association of Builders (NOSTROY)
  • National Association of Designers (NOP)
  • National Association of Surveyors (NOIZ)

At the All-Russian Congress NOSTROY in December 2014, the need to combine all these structures into one was discussed, which should benefit all participants in the construction market.

SRO approval

An SRO permit is a permit issued by a self-regulatory organization to its member to carry out the work specified in the List of types of construction work (approved by Order of the Ministry of Regional Development of the Russian Federation of December 30, 2009 No. 624). If a SRO permit is required for construction work, and an organization or an individual entrepreneur operates without it, administrative (a fine of up to 50 thousand rubles) and even criminal liability is provided for this.

The permit is issued for an unlimited period of validity, and it is possible to work on it throughout the territory of Russia. The procedure for granting admission to an SRO depends on the conditions approved by the internal regulations of a particular self-regulatory organization. The requirements for issuing a certificate of admission are approved at a general meeting of members of a self-regulatory organization separately for each type of work, and they depend on the objects at which these works are carried out: unique, especially dangerous, technically complex.

Those wishing to obtain a permit will have to document the presence in the staff of workers with the necessary qualifications and a sufficient technical base. The minimum requirements for personnel is the presence of three specialists with higher education or five with secondary specialized education (with a certain length of service and qualifications). Some SROs may require their members to be ISO certified when joining. Such a certificate confirms that its owner has an organized quality management system, which ensures high quality goods and services.

How to choose an SRO?

The Federal Service for Ecological, Technological and Nuclear Supervision (Rostekhnadzor) maintains a state register of self-regulatory organizations. In addition to the register of the SROs themselves, a list of members of each self-regulatory organization is also provided, which allows the customer to verify the legality of the admission of the SRO of a particular contractor. Be sure to make sure that the self-regulatory organization you have chosen is in this register, the permits issued by SROs that are not in it are invalid.

SRO can be regional or include builders with different areas Russia, and finding a future partner does not matter: legal SRO permits are valid throughout Russia, and the application and further document flow are often carried out electronically. It is better to choose a large, long-running organization with a large number of participants and an impressive compensation fund. Each SRO sets its own requirements and conditions for those who join it, the amounts of fees will also be different: entrance, membership and target. The amount of the contribution of the compensation fund is established by law, therefore it is the same for all SROs.

The state register contains all the information on each self-regulatory organization, indicates the types of work for which it can issue permits, the size of the compensation fund, and contact details. By going from the register to the non-profit partnership page, you can get acquainted not only with the requirements for joining the SRO, but also find out the plan of control measures, the results of past inspections, and civil liability insurance.

How to join the SRO?

To join the SRO, an organization or an individual entrepreneur must fulfill a number of requirements:

1 .Prepare the necessary package of documents. As an example, here is a list of documents of one of the SROs:

  • application for obtaining a certificate of admission;
  • copies of the Articles of Association, extract from the Unified State Register of Legal Entities, certificate of TIN, protocol on the appointment of the director;
  • information on the number of managers and specialists;
  • copies employment contracts, work books, diplomas, certificates of promotion for executives and specialists with higher or secondary vocational education in the profile of the declared activity;
  • information on the number of workers with qualifications of at least 3 categories;
  • scheme production structure organizations;
  • information about technical means, including those involved on a contractual basis;
  • information about buildings, structures, premises used for the implementation of the declared types of work (including temporary and auxiliary);
  • information on the provision of the declared types of work with normative-technical and technological documentation;
  • information on the types of construction activities performed by the organization at capital construction sites;
  • information about the quality control system for construction and installation works, building materials, structures and products.

Additionally, the SRO may request accounting and tax reporting, local documents on labor protection, information about the construction activities and professional reputation of the candidate, certificates of attestation of their own laboratory or an agreement with such a laboratory, etc.

2 .Pass verification of submitted documents control management SRO. Some self-regulatory organizations are not limited to a desk audit (purely documentary), but arrange an on-site audit to check the real activity of the candidate.

3. Pay fees for participation in the SRO: entrance, membership, target, as well as a contribution to the compensation fund.

4. Get a civil liability insurance policy. This condition is not set by all SROs, but without such a policy, the contribution to the compensation fund will be higher.

5. Obtain a certificate of admission to work.

How much does it cost to join the SRO?

Despite the fact that the SRO is called a non-profit partnership, maintaining its functioning is not cheap. This is a complex structure that unites not only the participants, but also includes the control, audit and disciplinary commissions; executive and collegiate management bodies; arbitration court. The supreme governing body of the SRO is general meeting its members. To finance this activity, the participants of the partnership pay fees upon joining the organization: entrance, membership, target.

The amounts of these contributions are set by the organization itself, here is an example of these amounts of one of the non-profit partnerships:

  • entrance fee - 10,000 rubles;
  • annual membership fee - from 55,000 rubles (with income of an SRO member up to 10 million rubles) to 150,000 rubles (with income of more than 500 million rubles);
  • the target annual fee is 5,000 rubles.

And finally, a contribution to the compensation fund, which is used to compensate for the damage caused by SRO participants to third parties as a result of their professional activities. Minimum size contribution to the compensation fund specified in Art. 55.16 of the Town Planning Code and is:

  • for builders from 300,000 rubles, and in the absence of a civil liability policy from 1 million rubles;
  • for designers and surveyors from 150,000 rubles, and in the absence of a civil liability policy from 500,000 rubles.

Refund of all contributions made upon withdrawal of the participant from the SRO is not made.(Article 55.7 of the Town Planning Code and Article 13 of Law No. 315-F3 of December 1, 2007), except in cases of liquidation of a non-profit partnership.

According to Art. 55.6 (6) of the Town Planning Code, the SRO permit is issued no later than three days after the decision has been made, the entry fee and contribution to the compensation fund have been paid. Some SROs offer various ways of lending to their members, that is, paying installments in installments.

The sensational law No. 359-FZ of November 24, 2014, in fact, does not regulate the issue of “cancellation of installment plans in SROs”, but at the same time it obliges a self-regulatory organization to have a compensation fund in accordance with the number of its members. If, when checking a non-profit partnership, it turns out that the compensation fund is insufficient, then the SRO may be deprived of its status, and all permits issued by it will be invalidated.

Since the abolition of licensing for engineering surveys, design and construction of buildings and structures, the leaders of many construction companies puzzled by the question of the need to join the SRO and the possibility of working without it.

There is a lot of information on this issue, and on the Internet it is often either false or presented in such a way that there are even more questions than specific answers.

Summarizing the available information and relying strictly on current legal norms, we will try to give our comment on this question in an accessible form in such a way that each applicant can answer it independently.

So the main normative documents governing this topic are:

  • Urban Planning Code of the Russian Federation (part 17, article 51; article 48.1)
  • Order No. 624 of the Ministry of Regional Development of the Russian Federation dated December 30, 2009
  • Letter of the Ministry of Regional Development dated June 15, 2010 N 24099-RP / 08

Membership in SRO is NOT needed when it comes to:

1) About customized housing construction, i.e. stand-alone residential buildings, with the number of floors not exceeding three and intended for the residence of no more than two families in each house;

2) On the construction of residential buildings with no more than three floors, consisting of several blocks, the number of which does not exceed ten and each of which is intended for one family. These houses share a common wall(s) without openings with the neighboring block(s). They are located on separate land plots and have access to the common area (residential houses of blocked development);

3) About construction apartment buildings with the number of floors not exceeding three, consisting of one or more block sections, the number of which does not exceed four. In each of the block sections there are several apartments and common areas. Each block section has a separate entrance with access to the common area;

4) About building a garage on land plot granted to an individual for purposes not related to the implementation of entrepreneurial activities, as well as on the construction of a summer cottage on a land plot provided for gardening;

5) On the construction, reconstruction of objects that are not objects of capital construction (kiosks, sheds and others);

6) On the construction of buildings and structures for auxiliary use on the land plot;

7) On changing capital construction objects and (or) their parts, if such changes do not affect the design and other characteristics of their reliability and safety and do not exceed the limiting parameters of permitted construction, reconstruction established by the urban planning regulations;

8) About fulfillment the following types works during construction, reconstruction and overhaul of capital construction facilities*:

  • 1.1. Marking work in the process of construction< * >
  • 1.2. Geodetic control of the accuracy of the geometric parameters of buildings and structures< * >
  • 2.1. Dismantling (dismantling) of buildings and structures, walls, ceilings, flights of stairs and other structural and related elements or parts thereof< * >
  • 2.2. Construction of temporary: roads; sites; engineering networks and structures< * >
  • 2.4. Installation and dismantling of inventory external and internal scaffolding, technological garbage chutes< * >
  • 3.1. Mechanized excavation< * >
  • 3.5. Soil compaction with rollers, compactors or heavy rammers< * >
  • 9.1. Arrangement of structures of buildings and structures made of natural and artificial stones, including those with cladding< * >
  • 9.2. Installation of brick structures, including those with cladding< * >
  • 9.3. The device of heating furnaces and hearths< * >
  • 11.1. Installation, reinforcement and dismantling of structural elements and enclosing structures of buildings and structures, including those made of glued structures< * >
  • 11.2. Assembly of residential and public buildings from prefabricated parts of a complete delivery< * >
  • 12.3. Protective paint coating< * >
  • 12.11. Works on thermal insulation of pipelines< * >
  • 13.1. Installation of roofs from piece and sheet materials< * >
  • 13.2. Roofing from rolled materials< * >
  • 13.3. The device of self-leveling roofs< * >
  • 14.1. Surface cladding with natural and artificial stones and linear shaped stones< * >
  • 14.2. Installation of ventilated facades< * >
  • 15.1. Installation and dismantling of the water supply and sewerage system< * >
  • 15.2. Installation and dismantling of the heating system< * >
  • 15.4. Installation and dismantling of the ventilation and air conditioning system< * >
  • 15.5. The device of the power supply system< * >
  • 15.6. Arrangement of electrical and other control networks for life support systems of buildings and structures< * >(see text in previous edition)
  • 20.1. Arrangement of power supply networks with voltage up to 1 kV inclusive< * >
  • 20.13. Arrangement of external communication lines, including telephone, radio and television< * >
  • 23.5. Installation of compressor units, pumps and fans< * >
  • 23.6. Installation of electrical installations, equipment, automation and alarm systems< * >
  • 23.24. Installation of equipment for food industry enterprises< * >
  • 23.27. Installation of equipment for cinematography enterprises< * >
  • 23.28. Installation of equipment for electronics and communications industries< * >
  • 23.29. Installation of equipment for healthcare institutions and medical industry enterprises< * >
  • 23.30. Installation of equipment for agricultural production, including fish processing and fish storage< * >
  • 23.31. Installation of equipment for consumer services and public utilities< * >
  • 23.33. Installation of equipment for communication facilities< * >
  • 24.7. Commissioning of automation in power supply< * >
  • 24.10. Commissioning of automation systems, alarm systems and related devices< * >
  • 24.11. Start-up and commissioning of offline system commissioning< * >
  • 24.12. Commissioning works of complex adjustment of systems< * >
  • 24.13. Commissioning of telemechanics< * >
  • 24.14. Adjustment of ventilation and air conditioning systems< * >
  • 24.18. Commissioning of refrigeration units< * >
  • 24.21. Commissioning of hot water boilers< * >
  • 24.22. Commissioning of boiler auxiliary equipment< * >

As well as work performed by the general contractor (work on the organization of construction, reconstruction and overhaul by an engaged developer or customer on the basis of an agreement by a legal entity or individual entrepreneur), performed at the following facilities:

  • 33.1.8. Enterprises and objects of light industry< * >
  • 33.1.9. Enterprises and objects of the food industry< * >
  • 33.1.10. Enterprises and objects of agriculture and forestry< * >
  • 33.2.7. Enterprises and public transport facilities< * >

9) On the performance of the following types of work in the preparation of design documentation for capital construction projects *:

  • 4.3. Works on the preparation of projects for internal power supply systems< * >
  • 4.4. Works on the preparation of projects for internal low-voltage systems< * >
  • 8. Works on the preparation of projects for the organization of construction, demolition and dismantling of buildings and structures, extension of the service life and conservation< * >

10) On the performance of the following types of work as part of engineering and environmental surveys*:

  • 4.5. Study of vegetation, wildlife, sanitary-epidemiological and medical-biological studies of the territory< * >

* Types of work marked with “< * >» do not require obtaining a certificate of approval when performing them at general construction sites. When carrying out work marked with the sign "< * >» at especially dangerous, technically complex and unique facilities listed in Article 48.1 of the Town Planning Code of Russia, it is necessary to join the SRO and obtain a certificate of admission to these works. Especially dangerous and technically complex objects include:

1) nuclear facilities (including nuclear installations, storage facilities for nuclear materials and radioactive substances, storage facilities for radioactive waste)

2) hydraulic structures of the first and second classes, installed in accordance with the legislation on the safety of hydraulic structures

3) communications facilities that are especially dangerous, technically complex in accordance with the legislation of the Russian Federation in the field of communications

4) power lines and other electric grid facilities with a voltage of 330 kilovolts or more

5) objects of space infrastructure

6) aviation infrastructure facilities

7) infrastructure facilities of public railway transport

8) subways

9) seaports, with the exception of specialized seaports intended for servicing sports and pleasure vessels

10) thermal power plants with a capacity of 150 megawatts and more

11) cable cars

12) hazardous production facilities subject to registration in the state register in accordance with the legislation of the Russian Federation on industrial safety of hazardous production facilities:

a) hazardous production facilities of hazard classes I and II, where hazardous substances are obtained, used, processed, formed, stored, transported, destroyed

b) hazardous production facilities that produce, transport, use melts of ferrous and non-ferrous metals, alloys based on these melts using equipment designed for a maximum amount of melt of 500 kilograms or more

c) hazardous production facilities where mining operations are carried out (with the exception of the extraction of common minerals and the development of alluvial deposits of minerals carried out by an open method without the use of blasting), mineral processing.

Unique objects include capital construction objects, the project documentation of which provides for at least one of the following characteristics:

1) height more than 100 meters

2) spans over 100 meters

3) the presence of a console more than 20 meters

4) deepening of the underground part (in whole or in part) below the planning level of the earth by more than 15 meters

Summarizing, we come to the conclusion that the list of works, performing which you can not join the SRO is quite extensive. If among this list you did not find those types of activities that you are engaged in, then you definitely need to obtain a certificate of admission to work.

This article was relevant until the entry into force of the new edition of the Town Planning Code of the Russian Federation of July 1, 2017.

For up-to-date information, please contact us for a free consultation.
by phone: +7-911-943-45-89
or by e-mail [email protected]

Today, with our help (in 2-3 days), you can also get an extract from the register of members:

  • (we work with the following subjects of the Russian Federation: Moscow, Moscow region, St. Petersburg, Leningrad region, Krasnodar Territory (Krasnodar, Sochi, Novorossiysk, Armavir), Republic of Adygea (Adygea, Maykop), Karachay-Cherkess Republic (Cherkessk), Republic of Crimea (Simferopol), Sevastopol, Sverdlovsk region(Ekaterinburg, Nizhny Tagil, Kamensk-Uralsky, Pervouralsk), Kurgan Region (Kurgan), Republic of Tatarstan (Kazan, Naberezhnye Chelny, Nizhnekamsk, Almetievsk), Republic of Sakha (Yakutia, Yakutsk), Magadan Region (Magadan), Chukotsky autonomous region(Anadyr), Nizhny Novgorod Region (Nizhny Novgorod, Dzerzhinsk, Arzamas), Irkutsk region(Irkutsk, Bratsk, Angarsk), Voronezh region (Voronezh), Vologda Region(Vologda, Cherepovets), etc.)

    If the subject is not specified, specify the possibility of obtaining an SRO in your region

  • (for all subjects of the Russian Federation)
  • (for all subjects of the Russian Federation)

Not all SROs place contributions of their members in accredited banks, as a result of which they are excluded from the self-regulation register, and their members are deprived of the right to conduct activities in the field of construction. According to 372-FZ, the SRO compensation fund, which consists of contributions from members of self-regulation, must be located in one of the accredited banks. According to NOSTROY statistics in 2018, 83 billion rubles ( total amount compensation funds in the Russian Federation) must be placed on the appropriate accounts. Actually placed about 57 billion. In this regard, 30 SROs were excluded from the register, and their members lost both their permits and the money invested in obtaining them.

Since 2017, a new type of SRO permit is required for work

Under the new legislation, paper-based tolerances in the form of certificates are no longer issued. They were replaced by a register, an extract from which confirms the fact of permission to work. If organizations issue an old-style paper permit, it will not be able to function legally, and criminal liability is provided for doing work with such tolerances.

It is obligatory to have at least two specialists listed in the NOSTROY register

As of July 1, 2017, each member of the SRO must have two engineers in the staff that meet the following requirements: higher technical specialized education; advanced training received no later than the previous two years; five years of work in an engineering position (the experience is counted only after receiving a diploma of higher education); ten years of general experience in construction; no outstanding conviction. Compliance with the requirements must be confirmed by the fact that they are included in single register NOSTROY specialists. If an SRO is ready to accept an organization without specialists, it cannot be called reliable. Any verification by NOSTROY will reveal this violation and may deprive the SRO of the license.