Pot for flowers polymer clay. Pots made of polymer clay do it yourself

Original clay pot with own hands

It is always nice to look at things in the house that were made with your own hands. They noticeably fill the house with comfort and give a special soft charm to the interior. Also, such things can say a lot about the tastes or hobbies of the owner. In these important details a special place is occupied by flower pots, which often stand at home in the most conspicuous places: a windowsill, a table, a chest of drawers, a shelf, etc. For an original interior, you should choose the same interesting and creative containers for flowers, and then the atmosphere in your home will become much more pleasant. DIY flower pots are a wonderful decor element that can be made according to the individual measurements of your favorite plants.

In order to make original hand-made clay pots, You will need:

• sharp knife for cutting clay or paper;
• polymer clay or any other clay intended for modeling;
• baking paper;
• template for the future pot;
• stick with a rounded end for smoothing corners;
• rolling pin for rolling clay.

Some clarification before starting

For this needlework, it is best to take decorative polymer clay. It easily hardens itself, without requiring additional drying. If you cannot find one, then you can use the most ordinary modeling clay, only now it will need to be baked to harden it. It is not necessary to use a template before starting a hand-made. After all, you can always use your imagination, improvising on the go. But it is worth considering that a slightly disproportionate pot may turn out, so it is best to think over and draw the design of the future container in advance, and then just print it.

So, let's begin!

1. First you need to put the clay on baking paper and roll it with a rolling pin into a layer, approximately 1 cm thick.

2. If you decide to use ready template, then you need to carefully cut the clay along its contour or cut out parts of the pot by eye.

3. Next, you need to tightly connect the sides of the pot, and then with the help of a stick, carefully cover and smooth out all the cracks. Just remember to keep your hand opposite side the walls of the pot so that it does not sag.

4. When the pot is completely ready, you need to let it dry completely. A container from polymer clay must be dried in the oven. detailed instructions baking instructions can be read on the packaging of clay, because it may differ from different types of material.

After your pot has completely set, all that remains is to check if it is leaking, and then plant your favorite plants in it. You can also paint the pot to your taste, or leave it in its original form. Let's take a look at a few original ideas for making pots with your own hands.

In addition, you can not only just paint the pot with your favorite flowers, but also use the “ombre” technique, as shown below in the photo.

Can it be found in modern world a house without flowers? Probably not, almost every house has some kind of plant. But how many apartments are there in which the plant fits very well into the design of the room and is in a beautiful pot? Most likely a few ... Today we will tell you how to make a flower pot quickly and easily with your own hands.

We weave flower pots step by step with our own hands in a master class

This question can be asked by all readers of this article to themselves. Indeed, why not go to the store and find a suitable pot there. Now thousands of different pots are sold for every taste and color. Well, while you are thinking, you can list the most popular reasons for such an “act”:

• Don't want to spend money, or the price of a flower pot seems too high
• After going around all the shops, we could not find anything very original and interesting.
• Can't find the right size pot
• I want to do something useful

These are the most popular reasons why people refuse to go to the store and want to make their own pot. People who potty for a second or fourth reason will have the least amount of trouble and are more likely to get to the "winning end". These people clearly understand that they really want to make a pot with their own hands and will not go to the store for it, no matter what the difficulties. But they should be pleased - no big difficulties and no!

There is no clear list of improvised materials, probably, materials that pass moisture well will not work. You can take absolutely any materials. From improvised materials you can get a very beautiful and good pot. Most often, various cans are used as a container, for example, from canned pineapples. You can see an example of such a pot in the photo below.

Approximately the same result can be obtained from a mayonnaise bucket. Now such a bucket is not as common in supermarkets as it used to be, but you can find it.

Despite the huge variety of materials, we will almost always need: scissors, a ruler, a simple pencil, paints, colored paper, an adhesive that bonds iron and plastic surfaces. This is the minimum of materials that will be required in the manufacture of any pot.

A lot depends on what you need a new pot for and on your plant. The pot can be hung on the wall or put on the windowsill. Here we can not advise you something specific.

Large flower pot:

As many have understood, this pot is made from an ordinary iron bucket. When choosing a bucket, make sure that it is made of stainless steel. Otherwise, your bucket will deteriorate due to corrosion. Do not forget to make a few holes in the bottom of such a bucket so that the water after watering can drain into the pan.

If the bucket is not enough for your flower, then you can make it a “house” from waste material.

Create a small pot or a beautiful decoration from salt dough

A pot made from salt dough is suitable for small flowers. It will be strong enough, but its strength will not be enough to support a large plant. Salt dough gives another advantage - the ability to make a pot of any shape. Let it be a small pot, but it can have a very amazing shape and relief on its surface. To make such a pot or pot decoration, we need the following materials:

• Substances: flour, water, salt, glue, nail polishes of different colors.
• Scissors, toothpicks and always a hard, sharp object.

We need the last item for embossing and shaping the dough. You can use a knife, but you may have difficulty cleaning the dough from its blade.

You make the solution in proportions of 2 to 1. That is, two kilograms of flour per kilogram of salt. Be sure to stick to this ratio! Only small deviations from this proportion are allowed. Then start adding a little water, trying to get a composition that looks like soft plasticine. When you get such a solution, you can proceed to the direct manufacture of the pot.

Varnish is great for coloring salt dough. Probably, a worthy replacement for him can not even be found.

If you do not want to make a pot out of dough, then you can make a pot out of polymer clay, which has roughly the same properties.

Video on the topic of the article

The resulting pot can be decorated with many various ways. One of these methods is the decoupage technique. This technique consists in stickers on the product of images or their painting. This method of decorating is quite young, but it is very beautiful and allows you to get very high-quality images of various objects on your product.

The pot can be decorated not only by painting it, but also by placing beautiful crafts on it. It can be anything: butterflies, dragonflies and other beautiful insects that are easy to make with polymer clay. And all this will be done by your hands!

The following videos resemble a master class, and are built according to its principle. In each video, an experienced craftsman will show you how to make a particular pot.

We bring to your attention a master class on decorating flower pots in the form of unicorns with your own hands. What could be more charming than the combination of large cacti and fabulous animals? This is perfect harmony. They are so soft and fluffy!

Tools and materials Time: 3-4 hours Difficulty: medium

• white ceramic pots;
• artificial cacti of the Faux type;
• natural lichen/moss;
• Styrofoam balls, for placement inside the pots;
• gold-colored polymer clay;
• black and pink paint;
• felt in white, pink, green, blue and purple;
• scissors;
• hot glue gun.

Sleepy unicorn flower pot decor is incredibly cute, don't you think? These charming crafts are perfect for decorating large gifts or children's parties. Place real flowers or fake cacti (like ours) in these fun pots to get your little creative unicorn lovers in the holiday spirit!

Which of these pots do you like the most? We like them all, but our favorite is the small, light pink flower on the left side of the photo. He is so cute!

Flower pot decor - step by step instructions

Step 1: Place the cacti in pots

Place a Styrofoam ball in each ceramic pot. If your Styrofoam is too big, squeeze it with your hands and push it inside the pot.

Remove the styrofoam balls from the pots, apply some hot glue to the bottom of them, and reinsert them into the pots.

Apply some hot glue to the top of the styrofoam and press the lichen/moss into it. Then place cacti on the lichen.

Step 2: make the horns

Take golden clay and roll it to a smooth mass. If you feel that your clay is hard, knead it in your hands for a few minutes to warm it up.

Make a figure in the shape of a unicorn horn about 8 cm long from softened clay. Insert a toothpick into the bottom of this figure.

Repeat the horn making process as many times as you have pots available. Bake the products together with the toothpicks in the oven, according to the recommendations on the package of clay. When finished baking, remove the finished products from the oven and let them cool.

You can also add swirls to your horns, and after baking, paint them with metallic gold paint, just like we did for the largest horn!

Step 3: Draw Sleepy Faces on the Pots

Using black paint, draw U-shaped eyelids with three eyelashes on the pots. Also draw pink cheeks.

Step 4: Make Felt Flowers and Leaves

Cut a spiral about 3 centimeters wide from colored felt.

Roll the spiral from the outside towards the center, securing it along the way with hot glue.

After rolling, apply glue to the base of the flower, then close it with the free end of the felt.

Repeat the above steps for any other flowers you want to decorate the pots with.

Also cut out a few small leaves from the green felt.

Step 5: Make the Ears

Also cut out a few ears from the white felt, if they are not provided on the sides of your pots. For example, our large pot does not have ears, unlike small ones that have small protrusions on the sides. Therefore, ears do not need to be made for these pots.

Attach the ears to the sides of the pots using hot glue.

Step 6: Finish the Composition

Insert the Golden Unicorn Horn straight into the styrofoam, center front.

Using hot glue, attach the felt roses and leaves to the sides of the horn.

Repeat the above steps for small pots.

Insert the horns into the foam from the front center.

Attach one small flower and 1-2 leaves to the moss next to the horn with hot glue.

The decor of flower pots in the form of sleepy unicorns is ready! He is so simple and cute! We only added one flower per small pot, but you can go ahead and add as many as you like. Plus, if you're using artificial cacti (like we are), you can even add flowers to the top of the plants.

Any grower knows that there are never too many flower pots. In this article, we will show you how to make a very simple decorative clay flower pot. To make such a flower pot, almost no skills are needed. Even a beginner or a child will cope with the project.

Materials and tools for making a flower pot:

• clay that does not require firing
• Plastic container
• rolling pin
• clerical or construction knife
• acrylic paint
• paint brushes

How to make a clay pot for flowers with your own hands

Roll out the clay with a rolling pin. Place a plastic container on the resulting layer, cut off the clay by moving the knife along the edge of the container. This will give you the base of the pot.

Mix the rest of the clay and roll it out again into a long narrow strip. The length of the strip should be sufficient to wrap it around the walls of the container.

From a clay strip, make the walls of the pot. The edges of the strip can be overlapped or cut and butted end-to-end.

After wetting your fingers with water, smooth out all the seams.

Let the clay dry for 1-2 days. When the walls have hardened, the pot can be turned upside down to allow air to enter the bottom of the pot.

When the bottom is dry, you can start painting the pot.

Mix paint with water. With a wide brush, paint the bottom half of the pot.

Note: it is not necessary that the paint lay down in an even layer. Slight inaccuracy allows you to achieve a good result - it immediately becomes clear that the pot is made by hand.

If necessary, the paint can be applied in several layers.

Stir a drop of black acrylic paint with a few drops of water.

Dampen a brush with black paint, and then, running your fingers over the bristles, spray it onto the sides of the pot.

Advice: it is advisable to carry out this procedure on the street, otherwise you risk splashing furniture and walls.

After the paint has dried, the surface of the pot can be varnished.

Attention: an unbaked clay pot should not be exposed to moisture, so you need to place a plastic or metal container inside, and only then fill the pot with soil and plant plants.

Original article in English.

Did you know that you can knit not only with threads, but also with polymer clay? Of course, technically it is difficult to call it knitting, but the final result is very similar to a knitted fabric, only solid and eternal. Today we offer you to update old pots, decorate glass or tin cans. The finished product can become a new home for indoor plants, a candlestick or a decorative jar for storing something. So, we make pigtails from polymer clay!

Materials and tools:

• polymer clay for crafts (one or more shades);
• jar or pot for decoration;
• clay board;
• extruder for squeezing even "pasta" out of clay (optional).

How to make polymer clay pigtails: progress of work

Estimated time: 40 min

Step 1. Clay preparation.

First, take a piece of clay and knead it well in your hands. Then roll out a little and divide into equal parts. The parts do not have to be perfectly even and the same.

Step 2. Making pigtails.

Now take each piece of clay and roll it out with your hands. Gently roll back and forth until you have created long, even "sausages" of clay. Take your time and push lightly. If you strive for perfectionism, use a special extruder for clay crafts, then the strands will be perfectly even and the same. It is best to work with two strands of clay at the same time to create braids. Fold two "sausages" in half and twist in opposite directions from each other.

Step 3. Attach the pigtails to the jar.

To secure each braid, simply pinch off the excess at the top and bottom of the jar. The clay should adhere well to the tin or pot. Make sure you attach the pigtails correctly, follow the pattern.

Step 4. Make a piping.